- Construction materials:
- Body & Collet: Brass
'O'- Ring: Buna-N (other materials available)
- Working pressure:
- Limited only by the working pressure of the plastic tubing used up to 250 psi**
-
- Vacuum rating:
- Full** (29.9 in./Hg)
-
- Working temperature:
- -10°F to 200°F** (higher temperatures are possible with special 'O'-rings — call for details)
**Values listed are typical for the material used in manufacture, except where noted, and are meant only as a guide to aid in design. Field testing should be performed to find the actual values for your application.
|
|
Use NEWLOC BRASS fittings with all types of semi-rigid to rigid plastic tubing including nylon and polyethylene. They may also be used with limited soft tubing sizes using tube supports (available). Pulling on the inserted tubing or increasing the pressure actually tightens the seal.
Typical applications include systems for pneumatic control, robotics, instrumentation, and chemicals.
Manifolds pre-mounted with NEWLOC BRASS fittings or nickel-plated NEWLOC BRASS (for improved aesthetics) are available — call for details.
All male pipe threads come with a pre-applied sealant of fluoropolymer, however for subsequent use it is recommended that sealant, such as PTFE Thread Sealant be used. The push-to-connect fitting ends are self-sealing — do not use sealants at this connection.
If tube disconnection is performed, it may be necessary to re-cut the end of the tubing to ensure perfect sealing when reattached.
All items sold in increments of 5 pieces.
Newloc fittings are also available constructed of Acetal plastic material. |