NewAge Industries Plastic Tubing and Hose Fluid Transfer Specialists


NYLOBRADE® - The original braid-reinforced PVC hose
NSF certified PVC hose

Made in USA

    Clear, Phthalate Free, Braid Reinforced PVC Hose - NSF Listed PVC Hose
 
  • request a sampleOpen mesh polyester braiding permanently encapsulated in walls of clear, flexible PVC tubing
  • Phthalate, DEHP and BPA free
  • Raw materials meet California Proposition 65
  • Listed by the National Sanitation Foundation for food equipment materials (NSF-51) and potable water (NSF-61)
  • Non-toxic raw materials conform to USP Class VI and FDA standards
  • Offers much greater pressure capabilities than unreinforced PVC tubing
  • Mirror smooth interior permits outstanding flow characteristics
  • Crystal clear for full visual flow^
  • Corrosion and abrasion resistant with flexibility similar to rubber but with much longer life
  • REACH and RoHS compliant

nsf logo DEHP free

Recommended for BrewSavor
APPLICATIONS

Beverage Lines • Chemical Transfer • Coolant Lines • Filling Lines • Food Handling • Hydraulics • Instrumentation Lines • Material Handling • Medical • Oil & Fuel • Pneumatics • Potable Water • Spray Systems • Water & Fluid Feeds

Physical Properties**
Hardness, Shore A ±5 80
Tensile Strength, psi 2500
Elongation at Break, % 300
Brittle Temperature -50°F
Max. Operating Temperature 175°F
Max. Operating Temp. for NSF 140°F

**Values listed are typical for the material used in manufacture, except where noted, and are meant only as a guide to aid in design. Field testing should be performed to find the actual values for your application.

Recommended Fittings & Clamps 		  Notes

Clear NYLOBRADE is made from non-toxic raw materials that conform to Food and Drug Administration (FDA) standards for use in food contact applications. Its NSF listing makes NYLOBRADE a good choice for drinking water applications, those involving water at temperatures up to 60°C (140°F), and food processing applications.

NYLOBRADE is generally unaffected by most oxidizing and reducing agents. Diluted acids and alkalies have little effect, though if highly concentrated tend to make the hose less pliable. If chemical resistance is in question, in-plant tests are suggested.

Gasoline and oils will harden PVC over periods of intermittent use. In these applications, continuous use will slow the hardening process.

^NYLOBRADE HP (High Pressure) sizes 3/8" I.D. and up have a tighter braid pattern and, therefore, reduce the visual flow contact and increase the hose's resistance to bending & flexing. Heavier walls on similar I.D.s will be more resistant to kinking.

 

TOP OF PAGE

NYLOBRADE - NSF 51 & NSF 61 HOSE

Product Number Note  ID  OD  Wall  Wall Type  Available Lengths  Working PSI (at 70°F)  Calculated lbs/100 ft 
  1000076   .125 (1/8)  .315  .095  Standard  100  465  3 
  1000230 [B]  .188 (3/16)  .394  .103  Standard  100, 300, 500  315  5.06 
  1000307   .250 (1/4)  .453  .102  Standard  100  300  6.03 
  1000461   .313 (5/16)  .531 (17/32)  .094  Standard  100  280  7.77 
  1000538   .375 (3/8)  .600  .113  Standard  100, 500  230  9.26 
  1000692   .500 (1/2)  .728  .114  Standard  100, 300, 500  215  11.82 
  1000846   .625 (5/8)  .906 (29/32)  .141  Standard  100, 300  200  18.17 
  1000923   .750 (3/4)  1.024  .137  Standard  100, 300, 500  150  20.53 
  1001154   1.000  1.299  .150  Standard  100  130  29.03 
  1001308   1.250 (1-1/4)  1.732  .241  Standard  100  110  60.7 
  1001385   1.500 (1-1/2)  1.929  .215  Standard  100  70  62.12 
  1001462   2.000  2.500 (2-1/2)  .250 (1/4)  Standard  100  50  95.02 
  1020005   1.000  1.375 (1-3/8)  .188 (3/16)  High Pressure  100  185  37.8 
  1020012   1.250 (1-1/4)  1.732  .241  High Pressure  100  150  60.7 
  1020019   1.500 (1-1/2)  1.950  .225  High Pressure  100  90  65.5 
  1020026   2.000  2.500 (2-1/2)  .250 (1/4)  High Pressure  100  133  95.02 
  1020061   .250 (1/4)  .500 (1/2)  .125 (1/8)  High Pressure  100  400  7.9 
  1020075   .375 (3/8)  .625 (5/8)  .125 (1/8)  High Pressure  50, 100, 300  265  10.5 
  1020096   .500 (1/2)  .850  .175  High Pressure  100  258  20 
  1020117   .750 (3/4)  1.125 (1-1/8)  .188 (3/16)  High Pressure  100  233  30 
  1030309   .250 (1/4)  .435  .093  Thin  100  316  5.35 
  1030540   .375 (3/8)  .575  .100  Thin  100  215  8.02 
  1030694   .500 (1/2)  .710  .105  Thin  100  191  10.73 

request a sample[B] Limited stock item; lead times and minimums may apply -- call for details.
Add length suffix to part number when ordering. Example: 100 ft. of 1/8" I.D. x .315" O.D. is part number 100 0076-100.
Working pressures are calculated from burst testing using a 3:1 safety factor. Application testing is recommended.
 ID is the critical dimension for fittings application.

 


Download a printable PDF version of our Nylobrade PVC hose literature. Nylobrade_PVC_Hose.pdf (228kb)

 

TOP OF PAGE

BACK TO TUBING & HOSE PAGE

| Home | Products | About Us | Reference Tools | Contact Us | Request for Quote |
| News | Tradeshow Schedule | Employment Opportunities | Community Service | Why NewAge? |


Legal Notices & Trademarks | Privacy Policy | Terms & Conditions of Sale © 2000 - 2020 NewAge Industries, Inc.
   facebook   linkedin   twitter   youtube

We are your "Fluid Transfer Specialists®"
Contact Us For Experienced Technical Support:
Phone: 800-506-3924 or 215-526-2300
Fax: 800-837-1856 or 215-526-2190
E-mail: esales@newageindustries.com

NewAge® Industries, Inc., 145 James Way, Southampton, PA 18966-3817